咨詢：

Tube Sealer

Biosealer (CR6)

Biosealer CR6 is a battery operated sealing unit for EVA, PVC/EVA coextrusion and PVC blood bag tubes or sets for plasmapheresis. 

Below are examples of seals on the three types of OriGen tubes: 

Biosealer CR6 is comprised of three components:

•  Sealing handle with 6' coax cable
• Power unit with batteries and control unit monitored by microprocessor
• Battery charger 

Sealing Recommendations:

• Remove all moisture from the outside of the tube prior to sealing.
• Never stretch the tube during sealing.
• Seals should be made staight across, flat, and in line with the spike port wings. (see image below)

• To ensure proper fit in cryostorage cassettes, place a heat seal on the donor tube as close to the stub tube as possible, below the top of the spike ports. (see image below)

• Add a second seal closely above the first seal.  The second seal should be no higher than the height of the two spike ports. (see image below)

• Do not tear or pull seals apart as this can result in a jagged edge and may break open the seal, causing it to leak.  Cut the sealed tube through the middle of the second (top) seal.

 重慶市華雅干細胞技術有限公司在倉庫備有現貨，歡迎新老客戶：